Supplier Homepage
Product
Embossing/Vamp Machine Series
Ultrasonic Tape Cutting Machine Sogu Xb0113
Ultrasonic Tape Cutting Machine Sogu Xb0113
| FOB Price: | Get Latest Price |
|---|---|
| Min. Order: | 1 Piece |
| Port: | Shanghai, China |
| Production Capacity: | 30sets/Month |
| Payment Terms: | L/C, T/T, Western Union |
Request a custom order and have something just for you!
Send Customized Request
Basic Info
- Model NO.: Xb0113
- Color: as Picture Showed
- Shoe Machine: Leather Sptre Cutting Machine
- Output Power: 2600W
- Dimension: 1500*700*1450mm
- Trademark: SOGU
- Specification: CE
- HS Code: 33039609
- Place of Origin: Zhejiang, China (Mainland)
- Brand: Sogu
- Voltage: 220V/50Hz
- Work Speed: 50-80 Cuts/Minute
- Net Weight: 105kg
- Transport Package: Wooden Case
- Origin: Zhejiang, Wenzhou
Product Description
Ultrasonic Tape Cutting Machine
1. Scope of application: This machine is suitable to cut heat shrinkage socket,cable wire,PVE socket,insulating paper,twin surface tape,bonding.tape,cotton belt& zipper etc. , It is especially ideal for elastic tape cutting, with an error of ±1mm
2. High technalogy : The machine adopts Yaskawa servomotor and SMC pneumatic components from Japan, as well as imported ultrasonic generator and ball screw.
3.The cutting tongue is nice, flat, smooth and burr-free.
4. high precision, low waste rate and simple to operate.
5. For sizing cutting use.
6. High quality, efficiency and reliability
7. Long working life
Matters needing attention
1) moving workbench or spindle, according to the distance and artifacts, correctly selected movement speed, beware of collision when moving too fast.
2) when programming according to the actual situation to determine the correct processing technology and processing route, prevent due to insufficient processing position or on intensity artifacts caused by insufficient scrap or cut off the drop in advance.
Must be confirmed before 3) wire cutting program and the amount of compensation is correct.
4) check whether the wire electrode tension is enough. When cutting taper tension should be down to the usual half.
5) check the wire electrode of proper feeding speed.
6) according to the actual situation of work piece choose open or close the machining, on the premise of avoiding interference as far as possible to shorten the distance between nozzle and workpiece. The process, the distance between nozzle and workpiece generally take 0.05 ~ 0.1 mm.
7) check the jet choose whether reasonable, with high-pressure jet when rough machining, finish machining with low pressure jet.
8) slice observation should be paid attention to when processing stability, found that bad when adjust.
9) during processing, often should inspect the cutting condition monitoring, found the problem immediately.
Frequency | 15KHz |
| Voltage | 220V |
| Output Power | 2600W |
| Work Speed | 50-80 cuts/minute |
| Machine Dimension | 1500*700*1450mm |
| Net Weight | 105kg |
Gold Member 
Audited Supplier
){kind=link}