Xt0039 Manual Shoes Stamping Machine
|FOB Price:||US $500-1,000 / set|
|Min. Order:||1 set|
|Min. Order||FOB Price|
|1 set||US $500-1,000/ set|
|Payment Terms:||L/C, T/T, Western Union|
- Model NO.: Xt0039
- Power: 500W
- Weight: 51kg
- Voltage: 220V/50Hz
- Stamp: on Surface of Rubbers and Plastics,Leather, Woods
- Transport Package: Pacage Used in Exporting
- Origin: Zhejiang Wenzhou
- Shoe Machine: Leather Logo Embossed Hot Stamping Machine
- Outer Dimension: 530×420×550mm
- Color: as Picture Showed
- Table Area: 80×45mm
- Trademark: SOGU
- Specification: CE
- HS Code: 33039609
This series of manual stamping machine are applied to photo shop and small printing plant for stamping photo,name card,trademark and invitation card and are also the best tools for inpressing and stamping in the footwear industry.
1) the amplitude of the display:
Its function is refers to the ultrasonic vibrator whether the resonance between the die and the right. Rotary sonic adjustment knob, can make reading changes. General adjustment below 50.
2) current meter:
Indicates the working current of ultrasonic. Light welding head and the system state of resonance, normal is 0.4 ~ 0.6 A, varies according to the size of the output power and load, because the pressure area and flower round and complex, size, usually by 1.0 ~ 2.5 A.
3) power output:
Adjust the size of the output power, transferred to a different file, the ammeter reading will have change.
4) the upper die speed:
Adjust the wheel speed high and low. Digital speed is accelerated, the greater the faster; Vice reduced speed.
5) lower die speed:
Adjust the ultrasonic die speed. The greater the digital speed accelerated; Vice reduced speed.
6) manual/automatic switch:
By automatic gear, wheel and steel automatic operation; Hit manual switch, flower and die operation is controlled by the right foot pedals, waste pedal wheel and steel began to work, loosen the pedal wheel and steel mould is shut down.
7) overload indicator:
The red light is lit, said equipment overload. At this time, should immediately stop, check the reason after being troubleshooting, may continue to work.
8) sonic adjustment:
Ultrasonic vibration is adjusted to the resonance between the die and the state. Clockwise or counterclockwise turn the knob, the amplitude readings will change, has been mentioned before, generally within 50 normal readings.
9) ultrasonic testing:
If the function is the ultrasonic test is normal. Press the sonic test switch 1 ~ 2 seconds, the overload