Xb0114 Microcomputer Nylon Leather Strap Cutting Machine
|FOB Price:||US $2,000-5,000 / set|
|Min. Order:||1 set|
|Min. Order||FOB Price|
|1 set||US $2,000-5,000/ set|
|Payment Terms:||L/C, T/T, Western Union|
- Model NO.: Xb0114
- Color: as Picture Showed
- Function: Cutting Leather Nylon Strap Blet
- Max Cutting Thickness: 8mm
- Transport Package: Wooden Case
- Origin: Zhejiang, Wenzhou
- Shoe Machinery: Microcomputer Nylon Leather Strap Cutting Machine
- Brand: Sogu
- Wording Width: 1-100mm/10-65mm
- Trademark: SOGU
- Specification: CE
- HS Code: 33039609
1. Scope of application: This leather strap cutting machine is used for cutting colorful belts, nylon belts, and braided belts, etc.
2. Microcomputer : The machine adopts a microcomputer numerical control device to set the belt cutting length.
3. It is of high precision, low waste rate and simple to operate. .
4. The machine can realize both straight cutting and inclined cutting.
5. High quality, efficiency and reliability
6. Long working life
Matters needing attention
1) moving workbench or spindle, according to the distance and artifacts, correctly selected movement speed, beware of collision when moving too fast.
2) when programming according to the actual situation to determine the correct processing technology and processing route, prevent due to insufficient processing position or on intensity artifacts caused by insufficient scrap or cut off the drop in advance.
Must be confirmed before 3) wire cutting program and the amount of compensation is correct.
4) check whether the wire electrode tension is enough. When cutting taper tension should be down to the usual half.
5) check the wire electrode of proper feeding speed.
6) according to the actual situation of work piece choose open or close the machining, on the premise of avoiding interference as far as possible to shorten the distance between nozzle and workpiece. The process, the distance between nozzle and workpiece generally take 0.05 ~ 0.1 mm.
7) check the jet choose whether reasonable, with high-pressure jet when rough machining, finish machining with low pressure jet.
8) slice observation should be paid attention to when processing stability, found that bad when adjust.
9) during processing, often should inspect the cutting condition monitoring, found the problem immediately.